{ config, pkgs, ... }:

let
  port = 51820;
in
{
  # enable NAT
  networking.nat = {
    enable = true;
    externalInterface = "eth0";
    internalInterfaces = [ "wg0" ];
  };

  networking.firewall = {
    allowedUDPPorts = [ port ];
  };

  networking.wireguard.interfaces = {
    # "wg0" is the network interface name. You can name the interface arbitrarily.
    wg0 = {
      # Determines the IP address and subnet of the server's end of the tunnel interface.
      ips = [ "10.100.0.1/24" ];

      # The port that WireGuard listens to. Must be accessible by the client.
      listenPort = port;

      # This allows the wireguard server to route your traffic to the internet and hence be like a VPN
      # For this to work you have to set the dnsserver IP of your router (or dnsserver of choice) in your clients
      postSetup = ''
        ${pkgs.iptables}/bin/iptables -t nat -A POSTROUTING -s 10.100.0.0/24 -o eth0 -j MASQUERADE
      '';

      # This undoes the above command
      postShutdown = ''
        ${pkgs.iptables}/bin/iptables -t nat -D POSTROUTING -s 10.100.0.0/24 -o eth0 -j MASQUERADE
      '';

      # Path to the private key file.
      privateKeyFile = config.age.secrets.wireguard-canigou-private.path;

      peers = [
        # List of allowed peers.
        {
          # Home
          publicKey = "Gg+p7tysAhu2X841weBiQrqoKXh6kvcmDiCY62rLwQg=";
          # List of IPs assigned to this peer within the tunnel subnet. Used to configure routing.
          allowedIPs = [ "10.100.0.2/32" ];
          persistentKeepalive = 25;
        }
        {
          # Asus
          publicKey = "mzVH0N3q7UE/XjMwgRks+D8KFuIj91VkOK2ytgjsnkw=";
          allowedIPs = [ "10.100.0.3/32" ];
          persistentKeepalive = 25;
        }
      ];
    };
  };

  age.secrets.wireguard-canigou-private = {
    file = ../../../secrets/wireguard-canigou-private.age;
    mode = "0400";
  };
}