From f4d191f7f353c21feabc02c2f85ccec154fd423e Mon Sep 17 00:00:00 2001 From: Dmitriy Pleshevskiy Date: Tue, 5 Dec 2023 20:26:48 +0300 Subject: [PATCH] include center to bed tramming --- Creality-Ender3-V2/Configuration.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Creality-Ender3-V2/Configuration.h b/Creality-Ender3-V2/Configuration.h index e0e6057..7a1c390 100644 --- a/Creality-Ender3-V2/Configuration.h +++ b/Creality-Ender3-V2/Configuration.h @@ -1743,8 +1743,8 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1888,8 +1888,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) #define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm) @@ -2070,8 +2070,8 @@ #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "PETG" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_TEMP_HOTEND 180 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 100 // Value from 0 to 255